详细信息
最新版本：诊断v2.30 编程v2.46
BMW最新诊断设备ICOM
BMW ICOM 产品描述：宝马原厂检测仪BMW ICOM BMW新系统ISIS/诊断仪这是宝马集团服务一项
最新的计划，诊断，编码和完整的系统专用于服务宝马集团，将全面取代GT1/SSS/OPS诊断设备以后所有马系列将通过ISIS系统主机ISID与，ICOMA,ICOMB和ICOMC模块来诊断，编程，设码等相关服务
1.ICOM A介绍（16PIN接口）
ICOMA是基本组件。在物理方面，它一方面提供与车辆OBD II诊断接口连接的接口，另一方面提供自适应集成到修理厂网络所需的接口。通过一个高效的计算机核心，它作为协议转换器负责测试仪和车辆控制单元之间的数据交换以及接通测量技术所需的信号处理。供电电压经KL30通过车辆接口提供。ICOM A的电气运行规定有一个8V的最低电压。只有供电电压超过最低极限值，才能确保稳定的功能
2. ICOM B功能（MOST接口）
ICOM B是ICOM A的外部MOST (多媒体传输系统)接口。它通过USB导线与ICOM A连接。供电电压通过ICOM A经USB提供。只有当对ICOM A供应最低8V的电压时，ICOM B的电气运行才准备就绪在车辆侧ICOM B通过标准的MOST接口连接。
3. ICOM C功能（20PIN接口）
ICOM C是一个智能的接口转换器，它使OBD II与BMW圆形插座相匹配。作为加长的辅助模块，它将ICOM A与无OBD II接口的车辆连接。供电电压在车辆侧经KL30从圆形插座中提供。ICOM C的电气运行规定有一个8V的最低电压。KL30上的电压在装置内部传送到OBD II上，并由此向ICOM A供电。只有当车辆的蓄电池电压超过最低极限值，才能确保两个装置稳定的交互作用。
ICOM ISIS ISID for BMW
Product Description ICOM A introduction
ICOM A is a basic component. Phisically, on one hand, it supplies the interface that connects with car OBD II diagnosing interface; On the other hand, it can supply the interface that is self-adaptable intergrated into garage. As protocal converter, it is responsible for testing and data exchange in different controling units, as well as signal processing through a high effective computer core. Electrical power pressure is supplied by vehicle interface. The lowest power pressure of Electrical operation of ICOM A is fixed to 8V. Only it exceeds the lowest value, can a stable function be guaranteed.
![]()
ICOM B introduction
ICOM B is the external MOST interface of ICOM A, and it conect with ICOM A by a usual USB or that within supplying. Power is supplied by USB through ICOM A.
Only when the power supplied to ICOM A lower to 8V, can electrical running of ICOM B be ready to conect with standard.
ICOM C introduction
ICOM C in an intelligent interface convertor, which makes OBD II compatible with BMW round plug. As a lenghened auxiliary module, it makes ICOM A conects with non-OBD II vehicle module. Power is supplied by round plug through KL30.
The lowest pressure of ICOM C electrical running regulated to 8V. Electrical pressure on KL30 is conveyed to OBD II through internal equipment, and then to ICOM A. Only when vehicle battery voltage ICOM C exceeds to the lowest limitation, can it guarantee the stable interactivity of the two equipments.
ISID-PC function description
With the constantly increased car models and update, as well as its more and more complex functions, new requirements are in need for BMW after-sales service. The third generation of BMW workshop information system ISTA and its programming system ISTA/P can meet these requirements by new ways. Integrated service information display (ISID) is a garage operating device that is strong in function. It has the function of car diagnosing, programming, trouble guidance and maintanance information research, and so on.
Software version: ISTA D2.4, Programming softwareISTA/P 41.1
Product List
1. ICOM A
2. ICOM B
3. ICOM C
4. LAN canble (5m)
5. Extended cable for ICOM A
6. USB cable
|
ISIS ISID,宝马汽车检测仪,OBD2
